eBay Classifieds » All ads » Jobs » 

soldering in Boston

(1-20 of 29 ads)
View as:
Categories
  1. Licensed Plumber at Cranney Companies

    Proven track record in soldering, pipe threading, fixture installation, gas leak testing and repair. Why Cranney Companies:....

  2. Systems Installer at HB Communications, Inc.

    Proficient with cable pulling, audio, video, control, network terminations & good soldering skills. HB is seeking qualified candidates to fill the role of...

  3. Control Panel Wirer at Clutch Consulting

    Soldering and small piece assembly/testing as needed. We have a temp to hire opening requiring Electro-mechanical assembly experience....

  4. High Voltage Electrician Contractor Support, Level 3: Protection and Controls (HVECS3) at Silotech Group, Inc

    Skill to splice wires/cables by removing insulation, scraping clean, twisting together and soldering, or connecting....

  5. High Voltage Electrician Contractor Support, Level 2: Overhead/Underground (Cableman/Lineman) (HVECS2) at Silotech Group, Inc

    Clean, twisting together and soldering, or connecting conductors with mechanical connectors, splicing clamps, and....

    Ads
    1. Electronics Final Inspector (338)

      We are seeking an electronics circuit card/board final inspector to perform final inspection and reviews documentation prior to customer acceptance to ensure end product meets customer requirements.Candidate will inspect circuit boards, fix/rework soldering as needed, problem or reject, input data/reporting, calculate defect rates, and prepare documentation prior to customer acceptance. The ...

    1. Mechanical Engineer-AME at Jim Kay & Associates

      Knowledge of assembly processes including adhesives, soldering, ultrasonic welding, and laser welding preferred....

    1. Assembler/Solderer

      Our client in Manchester, NH is in need of a temporary assembler/solderer to fulfill a 3 month contract.MAJOR RESPONSIBILITY:Primarily responsible for the assembly, test and rework of various assemblies for DAS Systems, (Fiber, Interface Units (DIU’s) and other electro-mechanical RF assemblies as needed.ASSEMBLY DUTIES:Verify material issued in work order agrees with unit BOM (Bill of ...

    1. Photographer/Videographer at littleBits

      All the oscilloscopes, spectrum analyzers, microscopes, microchips, soldering irons, laser cutters, 3D printers, craft supplies and googly eyes you could ever...

    1. E/M Assembler #152400

      Need experienced e/m assembler to assemble e/m units. Will involved mechanical assemblies, some cabling, soldering and general e/m assembly. Performing bench-type processes to complete assemblies and subassemblies, using hand tools.

    1. HVACR Technician at PAE

      Supporting the Most Exciting and Meaningful Missions in the World HVACR Technician PAE is seeking an HVACR Technician, Lead to support state department

    1. Mechanical Design Engineer

      Design of new electronic products up to full production. This includes specification reviews, development program timelines and reports, design reviews, simple mechanical designs, documentation packages, pre-production builds and transfers to production. Also responsible for some sustaining engineering/change management design projects.Job Summary:Subject Matter Expert (SME). Coaches and ...

    1. Manufacturing Quality Technician at Balluff, Inc.

      Soldering Training and Certification Program. IPC 610 Certified Soldering Trainer experience and background in Quality discipline preferred....

    1. Plumbers and Apprentices

      A plumber will install, repair and maintain plumbing systems and fixtures in residential, commercial, institutional, industrial or public buildings. The Plumber reads blueprints, drawings and specifications to determine the layout of plumbing systems, water supply networks and wasted and drainage systems. The Plumber will then plan, install and service plumbing systems, fixtures, piping ...

    1. Field Engineering Technician at Honeywell

      Soldering wire to multi-pin connectors, and soldering components (including. Is an exciting time in Honeywell and here is a great opportunity to showcase....

    1. Commercial Plumbers and Apprentices

      A plumber will install, repair and maintain plumbing systems and fixtures in residential, commercial, institutional, industrial or public buildings. The Plumber reads blueprints, drawings and specifications to determine the layout of plumbing systems, water supply networks and wasted and drainage systems. The Plumber will then plan, install and service plumbing systems, fixtures, piping ...

    1. Field Service Engineer - Northern California at SP Industries, Inc.

      Familiar with plumbing and refrigeration processes including good piping techniques, silver soldering, and brazing....

    1. Senior Audio Visual Installation Technician

      HB Communications, Inc. is seeking an experienced person with strong AV installation skills along with leadership experience to join our team at HB Communications. This position is at our office in Waltham, Massachusetts.PRIMARY RESPONSIBILITIES:Understanding general principles behind audio and video theory, understanding how to utilize test equipment necessary for a fully functional ...

    1. Technician, Pit Road, Officiating Technology at NASCAR Event Management

      Use hand tools of the trade correctly and safely, including multi-meters, wire cutters and soldering irons. NASCAR seeks a talented professional to join us in...

    1. Production/Assembly

      Our company will provide on the job training!We are looking for individuals that can simply: follow directions, learn quickly and be reliable.You will be responsible for soldering small assembly components. (No experience required)Monday- Thursday 6am-4pm (EVERY FRIDAY OFF)!! APPLY TODAY AND START TOMORROW!

    1. Electronic Technician at EdgeTech

      Overall Purpose of the Position/Function: To perform in-house testing, troubleshooting and calibration of manufactured sub assemblies and finished systems...

    1. ENGINEERING

      Position Summary:The Field Service Technician is a field based and in house position that is responsible for customer support activities with a focus on instrument startup/training. Troubleshooting, preventative and corrective maintenance of instrumentation. The successful candidate must have the ability to utilize proven troubleshooting processes to diagnose and resolve technical issues on a ...

    1. Transducer Technician at EdgeTech

      The candidate must have good hand soldering skills as well as excellent manual dexterity with small tools....

    1. Team Lead - Installs

      Hobart Service, an ITW Company, is an international manufacturer of products for the food service and food retail industries including cooking, food preparation, warewashers and waste handling, weigh wrap, Baxter baking and Traulsen refrigeration. Hobart’s equipment is supported by a national network of factory-trained service representatives in locations across the United States.Due to ...

    1. Manufacturing Repair Technician 2 at Insitu

      Experience in painting, surface preparation, sealing, soldering, printed circuit board cleaning and conformal coating....

    1. Commercial Plumber

      Job ResponsibilitiesLooking for Commercial Plumbers with experience in:The ability to lay out, install, maintain and repair steam, air, water, gas and chilled water lines.Plumbing in lavatories, plant, ground, floor drains and sewer lines.Be able to work with many types of materials including: copper, steel or plastic pipe.Being able to locate, cut, and drill wall, floor, ceiling and roof ...

    2. Duct Installer

      DESCRIPTIONHiring sheet metal mechanics, with commercial experience, for a large long term project in Salem MAWe are looking for installers and mechanics with experience in:- All phases of the trade- Fabricating and installing ductwork and other metal parts- Installing ductwork for air conditioning and heating systems- Measuring, cutting, bending, and forming metal components- Fabricating ...

    3. Duct Installer

      DESCRIPTIONCurrently hiring openings for sheet metal mechanics, with commercial experience, for a large long term project in Portsmouth, NHWe are looking for installers and mechanics with experience in:- All phases of the trade- Fabricating and installing ductwork and other metal parts- Installing ductwork for air conditioning and heating systems- Measuring, cutting, bending, and forming ...

    4. Field Mechanic - Taunton, MA - 3 month project

      Large industrial installation company looking for field mechanics for a large renovation job lasting 3 months. Pay rate based on experience. Lots of OT! Six 10-hour days per week with rotating day off.Responsibilities include:- Clean, lubricate, and perform other routine maintenance work on presses and related equipment.- Dismantle and reassemble presses using hoists and hand tools.- Operate ...

    5. Assembler

      Our client in Londonderry, NH has a 6 months contract position for a Multi-Discipline Assembler. Responsibilities:       Assembly of small parts and or assemblies into other assemblies and/or complete systems using precision equipment.        Surface-mount and through hole soldering for electronic assemblies per IPC requirements.       Set up and operation of production equipment.        ...

    6. Solderer/Assembler

      We are seeking a Solderer/Assembler to become an integral part of our team! You will perform assembly line tasks as well as identify areas of improvement to increase efficiency.Responsibilities:Work with a team to assemble entire products or componentsRotate through tasks for specific production processesConduct quality inspections on products and partsPrepare finished products for ...

    7. Material Handler/Inventory Clerk (518)

          We are seeking a Material Handler/Inventory Clerk who will prepare and verify assembly kits to meet pre-scheduled release dates using pick list. Selects stock using first in-first out system, checks and records solderability date, vendor date code (when required) and quantity issued. Interfaces with materials and production personnel to resolve materials shortages. Responds to requests ...

    8. Avionics Senior Systems Engineer

      Are you a Senior Systems Engineer looking for a dynamic and growing company? Do you have a passion for aerospace? Are you looking to make an immediate impact on current projects? If so please read on! Astronics AeroSat is in need of a Senior Systems Engineer like you! Responsibilities· Review and creation of the technical requirements input documents and determine if the requirements are ...

    9. Systems Assembler #151203

      System level assembler needed with experience reading blueprint, wiring and plumbing diagrams. Assembling small test equipment. Experience wiring (small cables), assembling medical tubing (gluing/epoxies, some soldering). Inspecting own and others work. Perform assembly in a cell environment Drug Test and Background Check required.(NOT PC BOARD ASSEMBLY). Call 508-507-7179

    10. E/M Technician- Solderer - #152188

      Will work in manufacturing and will assemble and solder small parts under microscope -Fine pitch soldering a must! (Apply very tiny solder dots under a microscope)•Assemble/test parts using blueprints and schematics using hand and power tools•Point to point soldering(Soldering skills certified to IPC J-STD-001 standards)•Test functionality of soldered sensors•Knowledge of cable and harness ...

      1. Applications Engineer / Systems Integrator at Consolidated Sterilizer Systems

        Hands on (wiring, plumbing, soldering, hand tools, etc.). Consolidated Sterilizer Systems is looking for an Applications Engineer/System Integrator who is...

      2. Electronic Repair Technician at Juniper Systems

        Demonstrated troubleshooting & soldering skills. Electronic Repair Technician....

      3. BFT-AVN Field Service Technician at Vencore

        Assembling or installing equipment or parts requiring simple wiring, soldering, or connecting. Vencore is a proven provider of information solutions,...

      4. Prototype Assembler at Pulse Electronics

        Must be able to use all soldering equipment and solder types. Soldering equipment, hand tools, encapsulation equipment, impregnation equipment, marking...

      5. EV Power Electronics Design Engineer at Analog Group

        Experience using multimeter, oscilloscope, soldering tools, current measurement techniques, and spectrum analyzers....